Technical Features

wifi

Wifi-connection

The e-mark connects with your mobile device (such as a smartphone or tablet) through an own generated WIFI-network. Imprints are transferred fast and it can be marked immediately.

Markings

Markings for exact positioning

Markings on the side of the e-mark ensure a reliable positioning on your documents by the help of advanced sensor technology. A notch in the middle of the marking shows the center line of the imprint. It works perfectly with COLOP labels.

Transparent window

Transparent window

A transparent window in the front provides a better view of the imprint during marking.

Lightpipe

Light pipe

Rotating LEDs around the e-mark indicate the current state and connectivity to your mobile device

Cartridge

Tricolour ink-cartridge

Easily replaceable and long-lasting cartridge for high-quality full-colour imprints.

Printhead

Printhead

The printhead is integrated in the cartridge and visible on the bottom side of the e-mark.

battery

Battery

The inbuilt fast-charging Li-Po battery (11.1 V) allows using the e-mark for several hours (4.5 hours continuous marking) without connection to the grid. It is charged within 2.75 hours (0 – 100 %).

Docking Station

Docking station

Base station for quick charging and protection against drying out of the printhead.

Protecting Cap

Protecting cap

Is integrated in the docking station and protects the printhead optimally against drying-out. The e-mark should always be put in the docking station with its integrated protecting cap.

Sliding wheels

Sliding wheels

Move gently from left to right or the other way round for making an imprint, supported by sliding wheels.

Sensor

Sensor

An optical sensor provides speed control for best and reliable imprint results.

USB

USB-interface

Connect the e-mark with your computer via a Micro-USB cable. Note that charging is only done with the power plug.

On-off

ON/OFF switch

Switch on the e-mark through an opening on the docking station to avoid drying-out of the printhead.

Contacts

Contacts

4 contact pins provide a connection between the e-mark and docking station for charging.

Cover

Protective cover

Can be opened easily to change a cartridge via a small notch on the bottom of the cover.